Table of Contents
Advertisement
HOST SETUP
On the ADMINISTRATOR SETUP PAGE, click the HOST button to display the HOST SETUP window. Use this window to reg-
ister or delete the HOST IP and SUBNET MASK that can be accessed without user authorization.
q HOST AUTHORIZATION
Set HOST AUTHORIZATION to ON or OFF. The autho-
rization is carried out only for the masked range speci-
fied by the HOST IP ADDRESS and SUBNET MASK.
The default setting is OFF.
w HOST REGISTRATION
Set a HOST IP ADDRESS, SUBNET MASK and
ACCESS LEVEL from 1 to 3.
Select an ACCESS LEVEL (1 to 3). To change an
already registered password and access level, set
them in the same way as to register a new password
and access level, and then click the [SUBMIT] button.
For host authorization, refer to ACCESS AUTHORIZA-
TION on page 105.
Note: Only for the masked range with the host IP
address and subnetmask will be authorized.
89
e DELETE HOST
Select a registered HOST and press the [DELETE]
button to delete.
The list of currently registered hosts can be viewed by
clicking this pulldown list. The number in brackets indi-
cates the access level.
q
w
e
Advertisement
Table of Contents
