Table of Contents
Advertisement
q CAMERA SELECT
These buttons select the input image supplied to
VIDEO 1-4 on the WJ-NT204 transmitter. The selected
image appears in the Image Display area of the win-
dow.
w AUX
Selects the AUX IN image supplied by WJ-HD100 while
opening the HD100 control panel on the bottom center
of the window.
e ALARM LIST (WJ-NT204)
Displays the alarm list activated on the WJ-NT204
transmitter.
r ALARM RESET
Resets the alarm mode activated on the WJ-HD100.
t HD100 ALARM LIST ON
Displays the alarm list activated on the WJ-HD100
while opening the alarm control panel.
!0 REW
Rewinds the recorded image on the WJ-HD100 to the
start position.
!1 REV-PLAY
Plays back the recorded image reversely.
!2 PREV FRAME
Returns the frame one step to the previous while paus-
ing.
!3 PAUSE
Pauses the playback image.
!4 NEXT FRAME
Forwards the frame one step to the next while pausing.
!5 PLAY
Plays back the recorded image.
!6 FF
Fast-forwards the recorded image on the WJ-HD100 to
the end position.
!7 VARIABLE PLAY SLOW
Slows down the speed when playing back the image
normally, or speeds up when playing reversely.
!8 VARIABLE PLAY FAST
Increases the speed when playing back the image nor-
mally, or slows down when playing reversely.
!9 PLAY STOP
Stops playbacks including REV, REW and FF playback.
120
!0
!1
!7
!8
y CAMERA PRESET REGISTRATION
Preset registration can be made as follows.
While displaying the desired image position, select the
position number, then press the SET button.
This panel disappears when the AUX button is clicked,
and resumes when any of CAMERA SELECT 1-4 is
clicked.
u Camera Control Buttons
Controls the combination cameras selected with CAM-
ERA SELECT button.
i Status Window
Displays information when an alarm is activated on the
WJ-HD100.
o Image Display
Displays the playback image or the WJ-HD100.
!2
!3
!4
!5
@2
!9
@0
@0 REC
Starts recording.
@1 REC STOP
Stops recording.
@2 TIME & DATE Search
Retrieves the recorded image data designated by the
entered time and date. Type in a 14-digit number com-
prising YYYYMMDDhhmmss, then click GO button to
access to the data.
Playback starts from the designated point when the
data was found, or starts from the closest point
ascending from the designation when not found.
@3 MOVE CURSOR
Moves the cursor up or down while displaying the WJ-
HD100 ALARM LIST to select a recorded event in the
list.
@4 PLAY/SET
Starts playing back of the image designated with the
cursor when the alarm list is displayed.
Resets alarm data when DATA CLEAR is highlighted.
@5 ALARM LIST OFF
!6
@1
@3
@4
@5
Advertisement
Table of Contents
