To Call A Site - Panasonic WJ-NT204 Operating Instructions Manual

• Dialog Screen
There are several dialogs that appear during normal opera-
tions: YES/NO inquiry, etc. The major operations are
explained on the bottom half of the screen. For further
details, see MAJOR CONTROLS AND THEIR FUNCTIONS.
DIRECT DIAL
IP ADDRESS:
.
ENTER IP ADDRESS,THEN PRESS CALL
KEY,DIALING.
:MOVE CALL:CALL DEL:NO.CLEAR
ONE TOUCH DIAL:CALL
REDIAL:REDIAL NO. DIAL/ESC:CLEAR

To Call a Site

There are some dialing methods to call a site.
1. Direct entry of the destination IP address with the
numeric buttons
2. Using the registered Quick dialing directory
3. Using the registered One-touch dialing directory
4. Sequential dialing in the preset order
Direct Dialing
This is the most basic way to call a site.
ONE TOUCH DIAL
1
STEP 1
DIAL
1
QUICK
5
2
ESC
MENU
TELE
55
. .
Remote Controller WV-CU20
SWITCH VIDEO ALM ACK
2 3 4 5
SITE AUTO/MANU
STEP 2 STEP 3
CALL
1 2 3
REDIAL
4 5 6
7 8 9
PRESET SET DELETE
0 #
AUDIO MUTE
ENTER
WIDE AF NEAR FAR
1. Press the DIAL button.
The DIRECT DIAL dialog appears.
2. Enter the IP address of the site you wish to call, with the
numeric buttons.
3 When you entered a wrong number, press the DELETE
button. The number followed by the cursor will be
erased.
4. Press the CALL button. The dialog screen changes to
"CONNECTING" and the unit starts dialing.
4
3
DIRECT DIAL
IP ADDRESS:
. . .
ENTER IP ADDRESS,THEN PRESS CALL
KEY,DIALING.
:MOVE CALL:CALL DEL:NO.CLEAR
ONE TOUCH DIAL:CALL
REDIAL:REDIAL NO. DIAL/ESC:CLEAR
DIRECT DIAL
IP ADDRESS:
192.168. 0. 11
ENTER IP ADDRESS,THEN PRESS CALL
KEY,DIALING.
:MOVE CALL:CALL DEL:NO.CLEAR
ONE TOUCH DIAL:CALL
REDIAL:REDIAL NO. DIAL/ESC:CLEAR
DIRECT DIALING
IP ADDRESS:
192.168. 0. 11
CONNECTING
DIAL/ESC:CANCEL