Table of Contents
Advertisement
q
w
e
r
t
q WJ-NT204 CAMERA SELECT
These buttons select the input to VIDEO IN 1-4 on the
WJ-NT204 to display it in the Image Display area.
w INPUT from FRAME SWITCHER
Displays the image supplied from the video multiplexer,
and opens the 16-button panel where you can select
the input to the video multiplexer.
e ALARM LIST (WJ-NT204)
Opens the alarm list activated on the WJ-NT204 trans-
mitter.
r ALARM RESET
Resets the alarm mode.
t WJ-NT204 CAMERA PRESET REGISTRATION
Registers the presently displayed image position of the
camera connected to the WJ-NT204. Manipulate the
camera to the desired position, then select the preset
number with the pull-down button. Click the SET button
to register the position.
117
y
y CAMERA CONTROL Buttons
Controls the Combination camera designated with WJ-
NT204 CAMERA SELECT button for pan/tilt, zoom,
focus and auto-pan.
u Status Window
Displays alarm information when an alarm is activated.
i Image Display
Displays the camera image or multiscreen.
u
i
Advertisement
Table of Contents
