Panasonic WJ-NT204 Operating Instructions Manual page 122

Network interface unit
Hide thumbs Also See for WJ-NT204:
Table of Contents

Advertisement

o
!0
!1
!2
!3
!4
o WJ-NT204 CONTROL PANEL
Switches the whole of the window back to that of WJ-
NT204 control from that of WJ-HD500 control.
!0 WJ-HD500 CONTROL PANEL
Switches the control panel on the bottom center of the
window from the camera control to the WJ-HD500 con-
trol. The WJ-HD500 control panel is replaced with the
camera control panel when any of the 16-button (CAM-
ERA CONTROL) is clicked.
!1 CAMERA CONTROL
Selects the camera input to the WJ-HD500 to display
the image in the window. On the bottom center, the
control panel changes from the WJ-HD500 control to
the camera control.
!2 MULTISCREEN SELECT
Selects a multiscreen pattern for live or playback image
each time this button is clicked as follows.
4
7
9
10
123
13
16
4 screen segments
!5
!3 LIST THUMBNAIL
Displays the index of the recorded image in a list or
thumbnail format. Clicking this button toggles the for-
mat between list and thumbnail. The control panel for
list and thumbnail appears on the bottom center of the
window. Refer to page 126.
!4 ALARM RESET
Resets the alarm mode activated on the WJ-HD500,
and stops the alarm recording.
!5 WJ-HD500 Control Buttons
These buttons control the WJ-HD500 Hard Disk
Recorder. Refer to page 125-126.

Advertisement

Table of Contents
loading

This manual is also suitable for:

Wv-cu20

Table of Contents