Preparations; Computer Requirements; Lan Type Connection - Panasonic WJ-NT204 Operating Instructions Manual

PREPARATIONS

Computer Requirements

LAN Type Connection

The figure below shows how the WJ-NT204 can be connected directly to a PC for testing before it is connected directly to a
network. The connection can also be made via a hub.
Direct Connection to a PC without Hub
Connect the 10Base-T/100Base-TX port on the PC to the Ethernet port on the WJ-NT204 with a crossover cable.
Connection to a Client PC via Hub
Connect the 10Base-T/100Base-TX port on the PC to the Ethernet port on the WJ-NT204 with straight cables via a hub.
66
• OS: Windows98, 98SE/ Windows NT4.0/ Windows2000 or Windows ME
Note: Windows95 are not applicable to this system.
• WWW browser:
Internet Explorer Ver. 5.0 or higher
Netscape Navigator Ver. 4.7 or higher except Ver. 6.0 series
• Display resolution: 800 x 600 pixels or more
• CPU clock: 500 MHz or more
• Memories: 128 MB or more
• Network Interface Card: 10/100 Base-T
• Video Card
• Audio Card is required when using H.323 mode
Combination Cameras (4)
WJ-NT204 Network
Interface Unit for remote site
Combination Cameras (4)
WJ-NT204 Network
Interface Unit for remote site
1 1
2 2
3 3
4 4
5 5
6 6
7 7
8 8
Ethernet crossover cable
Ethernet Ethernet
straight cable straight cable
Hub
PC (Browser)
PC (browser)