3.
Press the EASY RECORDING button to start recording.
4.
When you have finished recording, press the record lock button and then the STOP
button.
Specifying DVS or DANTE-ACCEL
1.
In the Nuendo Live screen, press the NUENDO Live SETUP button.
The NUENDO LIVE SETUP popup window will appear.
NOTE
• Even if the CL's CONSOLE ID is set to something other than #1, you can still specify DVS or
DANTE-ACCEL in the NUENDO Live SETUP screen.
• However, you must not select the same DVS or DANTE-ACCEL from more than one CL console.
1
1
Setup method selection buttons
Use these buttons to select one of the following methods to specify DVS or DANTE-ACCEL.
• NO ASSIGN............................... Not assigned
• DVS ............................................. Select a DVS from the device list
• SPECIFIED IP ADDRESS ...... When using DANTE-ACCEL, specify the IP address of the PC
■ When setup method selection button = DVS
To choose from a list of the I/O devices on the Dante audio network, press the DVS button to display
the DEVICE LIST field.
1
2
This screen contains the following items.
1
DEVICE LIST
Shows a list of the I/O devices on the Dante audio network.
From the list, choose the DVS that you want to use with Nuendo Live.
2
DEVICE LIST select knob
Operate the multi-function knob to choose the DVS that you want to select.
190
Recorder
Reference Manual