Midi Setup - Yamaha CL1 Reference Manual

3.
Press the MIDI SETUP tab to access the MIDI SETUP page.
In the MIDI SETUP page you can select the type of MIDI messages that will be transmitted and
received, and choose the port that will be used. This page includes the following items.
1
2
4
6
7
1
PORT/CH field
Enables you to select the port and MIDI channel that will be used to transmit and receive MIDI
messages.
• Tx PORT/Tx CH.......Press these buttons to open popup windows in which you can
respectively select a port and MIDI channel to transmit MIDI messages.
• Rx PORT/Rx CH.......Press these button to open popup windows in which you can respectively
select a port and MIDI channel to receive MIDI messages.
2
PROGRAM CHANGE field
Enables you to switch MIDI Program Change message transmission and reception on or off.
• Tx .................................Switches Program Change transmission on or off.
• Rx.................................Switches Program Change reception on or off.
• ECHO..........................Switches on or off echo output of Program Change messages (If this
function is on, Program Change messages received from an external
device will be retransmitted without modification.).
3
PROGRAM CHANGE MODE field
Enables you to select the Program Change transmit/receive mode.
• SINGLE.......................If this button is on, Program Changes will be transmitted and received
on a single MIDI channel (Single mode).
• MULTI ........................If this button is on, Program Changes will be transmitted and received
on multiple MIDI channels (Multi mode).
• OMNI ......................... If this button is on, Program Changes on all MIDI channels will be
• BANK ......................... If this button is on, Bank Select messages can be transmitted and
4
CONTROL CHANGE field
Enables you to switch MIDI Control Change message transmission and reception on or off.
• Tx ................................ Switches Control Change transmission on or off.
• Rx ................................ Switches Control Change reception on or off.
• ECHO ......................... Switches on or off echo output of Control Change messages (If this
3
5
5
CONTROL CHANGE MODE field
Enables you to select the Control Change transmission/reception mode.
• NRPN ......................... If this button is on, the CL mix parameters will be transmitted/received
• TABLE button........... If this button is on, the CL mix parameters will be transmitted/received
6
PARAMETER CHANGE field
Enables you to turn SysEx (system exclusive) messages on or off. (These special messages are used
to change the CL parameters.)
• Tx ................................ Switches Parameter Change transmission on or off.
• Rx ................................ Switches Parameter Change reception on or off.
• ECHO ......................... Switches on or off echo output of Parameter Change messages (If this
7
OTHER COMMAND field
Switches on or off echo output of other messages (If this function is on, other messages received
from an external device will be retransmitted without modification.).
150
transmitted and received in Single mode. Multi mode transmission/
reception and Single mode transmission are disabled.
received in Single mode. (Bank Select messages switch the group of
Program Change messages to be used.)
function is on, Control Change messages received from an external
device will be retransmitted without modification.).
as NRPN messages on one MIDI channel (NRPN mode).
as Control Change messages on one MIDI channel (TABLE mode).
function is on, Parameter Change messages received from an external
device will be retransmitted without modification.).
MIDI
Reference Manual