Using The Recall Safe Function - Yamaha CL1 Reference Manual

■ Channel focus parameter display field
Enables you to select parameters for each channel that will be affected by Recall operations. You can use
the same procedure as that in the RECALL SAFE popup window.
3
FOCUS button
Switches the Focus Recall function on or off.
■ GLOBAL FOCUS PARAMETER field
Indicates the parameters and racks that will be affected by Recall operations for any scene. Procedures
and contents are the same as those in the RECALL SAFE MODE popup window.
4.
Follow the procedure starting with step 2 in the "Using the Recall Safe function"
section to make settings.
5.
If you want only specific parameters to be recalled for the selected channel or DCA
group, use the buttons other than ALL in the channel focus parameter display field
to select the parameters that will be recalled (multiple selections are allowed). If
you want all parameters to be recalled, turn on the ALL button (this is the default
setting).
If the ALL button is on, all other buttons for that scene will be turned off. Turning on any other
button will turn off the ALL button.
6.
Recall a scene for which you have made Focus settings.
Only the channels (DCA groups) / parameters selected in the FOCUS RECALL popup window
will be recalled. Bus settings will always reproduce the state of the recalled scene, regardless of the
Focus Recall settings.
NOTE
• Scenes for which Focus settings are made are marked by a "FOCUS" indicator in the STATUS
field of the SCENE LIST window (COMMENT tab).
• You can use the Focus function in conjunction with the Recall Safe function. Channels or
parameters that are excluded from Recall operations by either Focus or Recall Safe will not be
recalled.

Using the Recall Safe function

"Recall Safe" is a function that excludes only specific parameters/channels (DCA groups) from Recall
operations. Unlike the Focus settings (see
Safe settings are globally applied to all scenes.
1.
In the Function Access Area, press the CH JOB
button to access the CH JOB popup window.
2.
Press the RECALL SAFE button to access the
RECALL SAFE MODE popup window.
In this popup window, you can make settings for the
Recall Safe function. The window contains the
following items.
2
3
5
6
9
7
1
CLEAR ALL button/SET ALL button
The CLEAR ALL button turns off (disables) the Recall Safe function (that is currently set for
individual channels) and the Global Recall Safe function simultaneously. The SET ALL button
turns on (enables) these functions simultaneously.
NOTE
The selection of parameters that would be affected by the Recall Safe function will not change.
88
page 87), which you can apply to individual scenes, the Recall
RECALL SAFE button
1 4
8
Scene memory
Reference Manual