Effect Type - Yamaha CL1 Reference Manual

3.
To change the effect type, press the effect type field to open the EFFECT TYPE
popup window.
Press a new effect type to select it.
NOTE
• You can also change the effect type by recalling a library setting.
• Effect types "HQ.PITCH" and "FREEZE" can be used only in rack 1, 3, 5, or 7. Also, even if you
copy these two effect types, you will not be able to paste them to rack 2, 4, 6, or 8.
4.
To edit the effect parameters, press a knob in the effect parameter field to select
it, and turn the corresponding multifunction knob.
NOTE
For details on the parameters of each effect type, refer to the Appendices (see
5.
Edit the settings in the special parameter field as necessary.
For some effect types, parameters such as the following will appear in the special parameter field.
■ TEMPO
This field appears if a tempo-type or modulation-type effect is selected.
1
MIDI CLK button
If you turn this button on, the BPM parameter of that effect will
be set to match the tempo of the MIDI timing clock being input
from the MIDI port.
■ PLAY/REC
This field appears if FREEZE is selected as the effect type.
1
PLAY button/REC button
Enable you to record (sample) and play back when using the
freeze effect. For detailed operations, see
effect" on page
■ SOLO
This field appears if M.BAND DYNA. or M.BAND COMP. is selected
as the effect type.
1
HIGH/MID/LOW buttons
Allow only the selected frequency band to pass (multiple
selections are allowed).
2
Gain reduction meters
Indicate the amount of gain reduction for each band.
■ Gain reduction meter
page 233).
This field appears if Comp276/276S or Comp260/260S is selected as
the effect type.
1
Gain reduction meters
Indicate the amount of gain reduction applied by the
compressor.
126
"Using the Freeze
129.
Graphic EQ, effects, and Premium Rack
1
1
1 2
1
Reference Manual