Yamaha CL1 Reference Manual page 186

2
Status indicator
A symbol indicating whether the file is playing or paused is shown at the left edge of the title list.
: Playing, : Paused
3
Track number
Indicates the file number on the list.
4
Sub-directory
If there is a folder at a lower level, a folder icon is shown at the track number position. You can
move to the lower level by pressing the folder icon.
5
PLAY check symbol
Enables you to select multiple files that will be played back consecutively.
6
SELECT knob
Use the multifunction knob to switch the current song. (The title list will scroll up or down.)
7
NOW PLAYING button
If you turn this button on, the currently-playing song will always be selected in the list (it will have
a blue background).
8
MOVE UP/MOVE DOWN buttons
Sort the current song list in descending or ascending order.
9
Display switch buttons
Switch between the SONG TITLE display and the FILE NAME display on the list.
0
SAVE LIST button
Saves the order of the current title list and PLAY check symbol setting as a playlist.
A
RELOAD button
Loads the playlist that was saved most recently. Use this button to revert the current playlist you
are editing back to the previous setting.
3.
You can use the change directory button on screen and the folder icon in the NO.
column to view a content list of the folder that includes the desired file.
If the directory on the USB flash drive is displayed:
• Upper level .................Press this button to move up to the directory that is one level higher than
the current one.
• Subdirectory ..............Press this button to move to the corresponding sub-directory.
NOTE
• If you select a folder in this way, that folder will automatically be selected as the recording
destination.
• The folders that can be selected are restricted to the SONGS folder inside the YPE folder, and
folders located below the SONGS folder.
• The CL series console can recognize a file name that is a maximum of 64 single-byte characters.
If the file name is longer than this, the desired file may not play correctly.
• A maximum of 300 songs can be managed in a single directory. A maximum of 64 subdirectories
can be managed.
4.
Use the multifunction knob or press the on-screen file name to select the desired
file.
5.
Press a button in the PLAY MODE to select the playback mode.
You can choose from the following four playback modes.
SINGLE REPEAT
button button
On On The currently-selected song will play repeatedly until you stop playback.
On Off The currently-selected song will play once and then stop.
Starting with the currently-selected song on the title list, songs will play
Off On back consecutively until the last song. Then, playback will return to the
first song and will continue until you stop playback.
Starting with the currently-selected song in the title list, songs will play
Off Off
back consecutively, and playback will stop at the last song on the list.
6.
If you have selected a consecutive playback mode in step 5, press the PLAY check
symbol column for each song you want to play.
When performing consecutive playback, the files marked with a check symbol will be played.
7.
Press the PLAY/PAUSE (
The song you selected in step 4 will begin playing.
NOTE
• The USB memory recorder can play back audio files that feature a sampling rate of 44.1 kHz or
48 kHz.
• Even if the sampling rate at which the CL series console is operating differs from the sampling
rate of the audio file being played, the SRC (Sampling Rate Converter) function will automatically
convert the rate so that the file will be played back correctly.
• If the REPEAT button is on, playback will continue until you stop playback.
8.
To stop playback, press the STOP (■) button.
186
Mode
) button.
Recorder
Reference Manual