Remotely Controlling An Rio Unit - Yamaha CL1 Reference Manual

7.
To assign the output ports of the I/O device, select and press the I/O device in the
DANTE PATCH field of the I/O device screen to access the OUTPUT PATCH popup
window.
The OUTPUT PATCH popup window will appear.
1
1
Port select buttons
Press one of the buttons to open the PORT SELECT popup window.
8.
If you want to change the patching, press the port select button.
The PORT SELECT popup window will appear.
1 3
1
Category select list
Select the Dante port to which the signal you want to output is assigned.
2
Port select buttons
Select the Dante port (DANTE 1–64) to which the signal you want to output is assigned.
3
CLOSE button
Completes the settings and closes the popup window.
9.
In the same way, specify the channels that you want to output to other OUTPUT
ports.

Remotely controlling an Rio unit

Here's how to remotely control an Rio unit that's connected to the Dante connector.
1.
In the upper part of the I/O DEVICE screen, press the Rio tab to access the Rio field.
The Rio field includes the following items.
1
2
1
Display switch buttons
Press one of these buttons to view the corresponding I/O device. If you press and hold down the
button, all LEDs of the corresponding I/O device will blink.
2
ID/model name indication
This shows the ID number, model name, and version of the I/O device.
140
I/O device and external head amp
2
3
Reference Manual