Monitor - Yamaha CL1 Reference Manual

3.
Press the popup button or the meter field to open the MONITOR popup window.
In the MONITOR popup window you can make detailed settings for monitoring. The popup
window includes the following items.
3
1
9
4
2
1
SOURCE SELECT field
Select one of the following as the signal source that will be output to the MONITOR bus.
STEREO L/R STEREO L/R channel signals
MONO (C)
MONO channel signal
LCR STEREO L/R + MONO channel signals
OMNI 1–2 – 7–8 OMNI IN jacks 1–8 signals (per two channels)
PB OUT Recorder's PLAYBACK OUT signals
DEFINE The signal(s) selected in the ASSIGN field
2
ASSIGN field
If you selected DEFINE in the SOURCE SELECT field, use this field to specify the monitor source.
You can select up to eight monitor sources simultaneously. Pressing the CLEAR ALL button will
clear all selections.
3
DIMMER field
Enables you to make settings for the Dimmer function, which temporarily attenuates monitor
signals.
• DIMMER LEVEL knob
Adjusts the amount by which the monitor signals will be attenuated when the dimmer is on.
5 6 7
8
0
A
• DIMMER ON button
Switches the Dimmer function on or off. The monitor signal will be attenuated if this button is on.
4
TALKBACK DIMMER field
Enables you to make settings for the Dimmer function, which temporarily attenuates monitor
signals when TALKBACK is on.
• TALKBACK DIMMER LEVEL knob
Adjusts the amount by which monitor signals will be attenuated when talkback is on.
• TALKBACK DIMMER ON indicator
Indicates the on/off status of the dimmer function for talkback.
5
PHONES LEVEL LINK button
Enables you to link the signal level at the PHONES Out jack to the monitor signal level. If this
button is on, the MONITOR LEVEL knob and monitor fader knob will adjust the level of the
signal sent to the PHONES OUT jack.
6
CUE INTERRUPTION button
Press this button to interrupt the cue signal with the monitor signal. If this button is on and the
cue is enabled, the cue signal will be sent to the monitor output. With the factory default settings,
this function is turned on. If you do not wish to send the cue signal to the monitor output, switch
this button off.
7
MONO MONITOR button
Turn on this button to switch the monitor output signal to mono.
8
MONITOR OUTPUT button
Switches the monitor output on or off.
9
MONITOR FADER field
Enables you to set and view the monitor fader that adjusts the monitor level.
• MONITOR FADER LEVEL knob
Adjusts the monitor fader level. Pressing this knob will enable you to use the multifunction knobs
in the Centralogic section to adjust the level.
• FADER ASSIGN indicator
This area displays the faders that are currently assigned as MONITOR FADER. Indicator
assignments are as follows:
---- No assignment
MASTER A MASTER A fader only
MASTER A+ MASTER A, as well as MASTER B fader and Custom fader bank
MASTER B MASTER B fader only
MASTER B+
MASTER B, as well as Custom fader bank
CUSTOM One of the Custom fader bank faders
CUSTOMs Multiple Custom fader bank faders
99
Monitor and Cue functions
Reference Manual