Yamaha CL1 Reference Manual page 220

■ When setup method selection button = DVS
■ When setup method selection button = MANUAL
If you want to enter the device label of an I/O device and mount it, press the DVS or MANUAL button
to access the DVS/MANUAL field.
1
3
This screen contains the following items.
1
DEVICE LABEL
Displays the device label of the I/O device which you entered from the keyboard.
2
INPUT/OUTPUT knobs
Use the multi-function knobs to specify the number of inputs and outputs on the Dante audio
network.
3
Device label entry keyboard
Use this keyboard to enter the device label of the I/O device.
NOTE
• If the I/O device is a DVS, mount it by pressing the DVS button.
• If the device label you entered is detected automatically, the INPUT/OUTPUT knob settings will
be ignored, and the rated number of inputs and outputs will be specified.
3.
After you've selected the I/O device to mount, press the OK button to close the
DEVICE SELECT popup window.
REMOTE HA settings
Here's how to select which of the multiple HA devices on the Dante audio network will be mounted so
that they can be used. Up to 8 units can be mounted for one CL series console.
1.
In the lower part of the DANTE SETUP popup screen, press the REMOTE HA tab to
access the REMOTE HA field.
2
This screen contains the following items.
1
CLEAR ALL button
Clears all HA devices in the list to an unmounted state.
2
REFRESH button
Updates the displayed list of HA devices on the Dante audio network.
3
HA device select buttons
Press one of these buttons to open the REMOTE HA SELECT popup window.
The upper line of the button shows the device label.
The lower line of the button shows the product name and the number of inputs and outputs.
If no device has been mounted, the upper row will indicate "---" and the lower row will show
nothing.
220
3 1 2
Other functions
Reference Manual