Yamaha CL1 Reference Manual page 154

8.
To change the event assignment for each program number, press the desired event
in the list.
The MIDI PROGRAM CHANGE popup window will appear. In this window, you can specify the
event assigned to each program number. This popup window includes the following items.
1 2
1
TYPE field
Enables you to select the type of event.
The following table lists the events you can select.
NO ASSIGN
No assignment
SCENE Scene memory recall operations
EFFECT Effect library recall operations
PREMIUM RACK Premium Rack library recall operations
2
DESTINATION field
Enables you to select the rack for which you want to recall a library item. If EFFECT or
PREMIUM RACK is selected in the TYPE field, the rack number will be shown. If SCENE is
selected, this will indicate "- - -", and no choice is available for this field.
3
LIBRARY NUMBER/LIBRARY NAME field
Enables you to select the scene or library item to recall.
If you selected SCENE or EFFECT in the TYPE field, the LIBRARY NUMBER and LIBRARY
NAME field will appear. If you selected PREMIUM RACK in the TYPE field, the LIBRARY
NUMBER field will appear.
3
9.
Use the TYPE field to select the type of event to assign. If the type is other than
SCENE, use the DESTINATION field to select the rack number into which you want
to recall the item. Use the LIBRARY NUMBER/LIBRARY NAME field to select the
scene or library number that will be recalled.
Use the / buttons to select an item. Press the OK button to confirm the change and close the
MIDI PROGRAM CHANGE popup window.
NOTE
• You can also select the desired event, scene, or library in this field by pressing it.
• If you press an item in the field to highlight it, you will be able to rotate any of the multifunction
knobs to select the event, scene, or library.
10.
Assign events to other program numbers in the same way.
With these settings, executing the specified event on the CL series console will cause the
corresponding Program Change (or Bank Select and Program Change) messages to be
transmitted to an external device.
When an external device transmits Program Change (or Bank Select and Program Change)
messages on the appropriate channel, the event assigned to that program number of the
corresponding MIDI channel (or bank number) will be executed.
NOTE
• You can use the CLEAR ALL button to erase all assignments to program numbers. The
INITIALIZE ALL button will return all program number assignments to their default state.
• Assignments to program numbers are maintained as settings for the entire system, rather than
for individual scenes.
• In Single mode, if the same event is assigned to more than one program number on a Tx channel,
only the lowest program number will be transmitted. (If the BANK button is on, only the program
number of the lowest bank number will be transmitted.)
• In Multi mode, if the same event is assigned to more than one MIDI channel and more than one
program number, only the lowest program number on each MIDI channel will be transmitted.
154
MIDI
Reference Manual