Lower frame removal, right and left
The right and left lower frames are in the same FRU.
Left lower frame
1.
Remove the media tray, and remove the screw (A) in front.
2.
Remove the waste toner bottle. See
3.
Remove the imaging unit. See
4.
Remove the low-voltage power supply. See
page
4-43.
5.
Place the printer on the right side.
6.
Remove the tray 2 connector (B) by pinching the tabs together and lowering the connector into the printer.
Y112730-2
"Waste toner bottle" on page
"Imaging unit (IU) removal" on page
"Low-voltage power supply (LVPS) assembly" on
B
4-67.
4-40.
Repair information
4-45