Paper Jams; Avoiding Jams - Olivetti d-Color MF920 Service Manual

Paper jams

Avoiding jams

The following hints can help you avoid jams:
•
Use only recommended paper or specialty media.
For more information, see the Card Stock & Label Guide available at
http://www.olinet.biz.
•
Do not load too much paper. Make sure the stack height does not exceed the indicated maximum height.
•
Do not load wrinkled, creased, damp, or curled paper.
•
Flex, fan, and straighten paper before loading it.
•
Do not use paper that has been cut or trimmed by hand.
•
Do not mix paper sizes, weights, or types in the same stack.
•
Store the paper in an appropriate environment.
Do not remove trays while the printer is printing. Wait for Load tray <x> or Ready to appear before
•
removing a tray.
Do not load the manual feeder while the printer is printing. Wait for Load Manual feeder with <x> to
•
appear.
•
Push all trays in firmly after loading paper.
•
Make sure the guides in the trays are properly positioned, and are not pressing too tightly against the
paper.
•
Make sure all paper sizes and paper types are set correctly in the operator panel menu.
•
Make sure all printer cables are attached correctly.
Y112730-2 3-39
Diagnostic aids