2KL/2KK
(5) Detaching and refitting the left registration roller
Follow the procedure below to replace the left registration roller.
Procedure
1. Remove the paper conveying unit (see page
1-5-9).
2. Release the stoppers at the front and rear
side, and then remove the left registration
roller from the paper conveying unit.
3. Remove two stoppers, gear and two
bushes.
4. Replace the left registration roller and refit
all the removed parts.
1-5-14
Stopper
Gear
Stopper
Service Manual
Left registration roller unit
Paper conveying unit
Figure 1-5-22
Bush
Left registration roller
Bush
Stopper
Figure 1-5-23
Y110980-1