Option Trays 2 And 3 Service Check - Olivetti d-Color MF920 Service Manual

Option trays 2 and 3 service check

Step Questions / actions
1 Are two option trays being used?
2 If two option trays are being used, is the 550
sheet tray on the bottom?
3 Switch the order of the trays so the 500 sheet
tray is on the bottom, and print a page from
both trays.
Did the pages print from both trays?
4 Inspect the paperfeed tires on the tray that fails
to pick.
Do they appear worn.
5 Replace the paperfeed tires on the faulty tray
and print a page with media from the affected
tray.
Did the page print?
6
Check the option cable connected to JOPT1
for continuity.
Is there continuity?
7
Replace the cable and print from both option
trays.
Did the pages print from both trays?
8
Print a menu settings page.
Are all the attached option trays listed on the
first page of the menu settings pages?
Note: If two option trays are used,
the 650 sheet will appear as tray 2,
and the 550 sheet tray will appear
as tray 3.
9
Remove the 650 sheet tray from the printer,
attach the 550 sheet tray directly to the printer,
and print a page from the 550 sheet tray.
Did the page print?
10 With only the 650 sheet tray attached to the
printer, print a page from the 650 sheet tray.
Did the page print?
Y112730-2
Yes
Go to step 2.
Go to step 4.
Problem resolved
Go to step 5.
Problem resolved
Go to step 8.
Problem resolved.
Go to step 9.
Go to step 11.
Go to step 11.
No
Go to step 4.
Go to step 3.
Go to step 4.
Go to step 6.
Go to step 6.
Go to step 7.
go to step 8.
If the 550 sheet option failed
to appear, got step 9.
If the 650 sheet tray failed to
appear, go to step 10.
Replace the 550 sheet tray.
Replace the 650 sheet tray.
Diagnostic information
2-61