In-Call Context-Sensitive Soft Keys - Avaya 1230 Software User's Manual

Introduction to the Avaya 1230 IP Deskphone

In-call context-sensitive soft keys

When a call is active, use the context-sensitive soft keys to access the menu items shown in
the following figure.
Note:
Not all the following soft keys may be displayed, depending on the configuration of your
system and your IP Deskphone.
Figure 5: In-call context-sensitive soft keys
Table 4: Menu items accessed during an in-call session through context-sensitive soft
keys
28 Avaya 1230 IP Deskphone with SIP Software User Guide
Item
Conf Press the Conf soft key to obtain a dial tone to place
another call during an active call or to make a
conference call.
The Conf soft key behaves like the NewCal context-
sensitive soft key.
Trnsfr Press the Trnsfr soft key to transfer the current call to
another location or to another contact.
Audio Press the Audio soft key to:
Actvat The Actvat soft key appears when the call is not
active. The most common usage of this key is when
the call displayed onscreen is a call that was parked
against the user (or a call that the user placed on
hold).
Comments? infodev@avaya.com
Function
1. Change codec:
• G722 (wideband codec)
• PCMU (standard u-law)
• G729 (729 codec)
• PCMA (standard a-law)
2. Monitor Audio Quality—used to view details
about the audio quality of an active call.
November 2013