Avaya 1230 Software User's Manual page 210

Advanced features
Enabling the screensaver in password-protected mode prompts you to enter a password
before logging in.
If allowed in the configuration, the user-defined password definition screen is displayed.
The screen displays Enter user password to activate screensaver followed by a
user-input prompt.
The following figure displays the screensaver password screen.
Figure 47: Screensaver password screen
To configure a password:
1. Press the Set context-sensitive soft key.
2. Enter a password. Press the abc/123 context-sensitive soft key to toggle input mode
3. Press OK. A Screensaver enabled message appears if the password is valid.
Active Screensaver
After the screensaver is enabled, and if the IP Deskphone is idle for the defined delay/time
interval, then the screensaver takes control of the IP Deskphone. The following figure shows
the IP Deskphone display with locked screen.
210 Avaya 1230 IP Deskphone with SIP Software User Guide
This context-sensitive soft key appears only if the phone configuration allows the
setting of user-defined passwords. Pressing this key invokes a password definition
screen that allows you to configure a password.
If a user-defined password is not allowed, then the Set context-sensitive soft key is
not visible, and you can use only the primary user login password to enable the
password–protected screensaver.
between numeric or alphabet.
An Invalid password message is displayed if the password is invalid.
Alternatively, press Back to dismiss the Enable (with password) mode menu.
Comments? infodev@avaya.com
November 2013