Messages Displayed When Using The Scanner Function; Messages Displayed On The Control Panel When Using The Scanner Function - Ricoh 5100WD Operating And Troubleshooting Manual

4. Troubleshooting When Using the Scanner Function
Messages Displayed When Using the Scanner
Function
This section describes likely causes of and possible solutions for error messages that may appear on the
machine's control panel and the client computer.

Messages Displayed on the Control Panel When Using the Scanner Function

This section describes likely causes of and possible solutions for the error messages that appear on the
control panel.
4
• If a message not described here appears, act according to the message. For details about how to
turn off the main power switch, see "Turning On/Off the Power", About This Machine.
Message
"Authentication has failed."
"Authentication has failed."
"Authentication with the
destination has failed. Check
settings. To check the current
status, press [Scanned Files
Status]."
"Cannot detect original size.
Select scan size."
"Cannot display preview of
this page."
66
Cause
The entered login user name
or login password is not
correct.
The machine cannot perform
authentication.
The entered user name or
password was invalid.
The original is a nonstandard
size.
The size of the image you
want to preview is larger than
A2 (C).
Solution
Inquire the user administrator for the
correct login user name and login
password.
Contact the administrator.
• Check that the user name and
password are correct.
• Check that the ID and password for
the destination folder are correct.
• A password of 128 or more
characters may not be recognized.
• Place the original correctly.
• In [Scan Settings] on the scanner
screen, specify [Scan Size].
Images larger than A2 (C) cannot be
previewed.
Specify A2 (C) or a smaller image, or
can again at A2 (C) or smaller.