Removal Of The Front Side Door - Lifan 620 Maintenance Manual

Removal of the rack board: First, remove the C pillar and high-mounted brake lamp; second, turn
over the rear seats and take out of the safety belt from 4 and remove 6, 7 and 5 successively. 1
and 2 are fixed on 6 through 3 and 4.
(Note: The rear sun visor device is added at 4 in the luxury scheme so the buckle is installed on
the lower place of the rear sun visor device. When removing the 4 for fixing 7, uplift 7 directly and
the buckle here can be taken out; 1 and 2 are welded on 7; four small pads replace 5 in certain
standard scheme.)
III. Front side door
1. Removal of the front side door, as shown in Fig. 7-23:
1. Plastic square nut
3. Small audio cover on left front side door superior angle
4. Small audio cover on right front side door superior angle
5. Left front side door guard panel assembly
7. Fixing compound bolts
9. Front side door armrest seat bolt
11. Right front side door armrest seat
13. Right front side door sealing felt pad assembly
15. Bolt caulking calking
Remove 3 and 4, unscrew 15 and 9 with the cross-tip screwdriver, open 8 and unscrew 7 as well.
Take out of 5 and 6 from 10 and 11, and unfix the harness. Pull out 5 and 6 to observe whether 14
remains on the metal sheet, if it does, take it with the buckle clamp and return it to the 5 and 6. If it
is necessary to remove 12 and 13, dismantle the door handle and armrest seat installing bracket
first, and tear out 12 and 13, if it is necessary to return them, glue recoating is required. If 1 needs
renewing, dismantle it with the flat blade screwdriver.
www.CarGeek.ir
Fig. 7-23
2. Small audio cover buckle on door superior angle
6. Right front side door guard panel assembly
8. Door handle seat installing bolt cover stem
10. Left front side door armrest seat
12. Left front side door sealing felt pad assembly
14. Front door guard panel fixing buckle
343
www.cargeek.ir