Replacement Of Parts And Components Assembly; Replacement Of Front Brake Wheel Hub Assembly; Disassembly Of Front Brake Wheel Hub Assembly - Lifan 620 Maintenance Manual

ii. Replacement of parts and components assembly

1. Replacement of front brake wheel hub assembly

(1) Disassembly of front brake wheel hub assembly

1) Raise and properly support the vehicle and dismantle the wheel assembly.
2) As per Fig. 2-9, disconnect the wheel speed sensor connector, and remove the sensor from the
bracket.
3) Remove the brake caliper bracket and brake caliper, and then secure the brake caliper on the
vehicle body to avoid bend or even damage of brake pipeline due to the weight of brake caliper,
and then dismantle the brake disk.
4) Remove the nuts of drive shaft.
5) As shown in Fig. 2-10, connect the removal tools of hub center shaft to the separating drive
shaft on the wheel bearing/wheel hub and the wheel bearing by 3 wheel nuts.
6) According to Fig. 2-11, remove the wheel bearing.
www.CarGeek.ir
Fig. 2-9
Fig. 2-10
Fig. 2-11
110
www.cargeek.ir