Decomposition Diagram; Front Side Door Glass; Glass Frame Riser - Lifan 620 Maintenance Manual

I. Decomposition Diagram. See Fig. 7-5:
1. Right front safety belt retractor
3. Hexangular flange bolt (a)
5. Hexangular flange bolt (c)
7. Safety belt altitude controller assembly
9. Rear seat safety belt retractor assembly
11. Rear seat double connection lock buckle assembly
II. Front side door glass, as shown in Fig. 7-5:
1. Removal:
(1) Remove the front side door glass frame riser switch assembly.
(2) Remove the front side door guard panel.
(3) Remove the front side door sealing film.
(4) Connect the glass frame riser switch, lower the glass to the reasonable position (reveal the two
installing holes of the glass).
(5) Dismantle the bolts for glass installation.
(6) Dismantle the glass of the front door.
2. Installation: install the glass of the door as per the opposite process, and pay attention to the
following notes:
(1) Check whether the top of the glass and the sliding channel contact evenly or not, and the
up-and-down movement is stable or not during the installation.
(2) Adhere the door sealing film firmly with the adhesive.
III. Glass frame riser:
1. Removal
www.CarGeek.ir
Section IV Front Side Door
Fig. 7-5
2. Safety belt head guard cap
4. Hexangular flange bolt (b)
6. Hexangular flange bolt (d)
8. Left front safety belt retractor
10. Hexangular flange bolt (e)
12. Rear seat lock buckle and waist belt assembly
330
www.cargeek.ir