Intake And Exhaust System; Air Cleaner Assembly - Lifan 620 Maintenance Manual

Section VI Intake and Exhaust System
I. Air Cleaner Assembly
Removal and installation (Fig. 2-82 shows the air cleaner assembly of sedan with TRITEC1.6L
engine).
Note: The filter core is made from waste paper and resin. Notes for operation:
Do not inflict severe collision and load after assembly and removal.
①
② The core should be well cooperated with the housing below the air cleaner during assembly.
1. Steel band type flexible ring clamps
3. B-type worm-driven hoop
5. Air cleaner upper cover
7. Spring clip

9. Air cleaner assembly

11. Liner tube
13. Snap button
15. Spongy cushion of cavity resonator
17. Cavity resonator assembly
19. Bearing weldment bolt
www.CarGeek.ir
Fig. 2-82
2. Crankshaft ventiduct
4. Engine intake hose assembly
6. Air cleaner filter core components
8. Air cleaner lower cover
10. Hexagon bolt with flat washer
12. Anti-vibration pad
14. Air cleaner intake pipe assembly
16. Hexagon flange bolt
18. Hexagon flange nut
157
www.cargeek.ir