Replacement Of Shock Damper; Disassembly Of Front Shock Damper Assembly; Installation Of Front Shock Damper Assembly - Lifan 620 Maintenance Manual

5. Replacement of shock damper

(1) Disassembly of front shock damper assembly.

1) Dismantle the front wheel.
2) Disconnect the brake hose. Remove the bolt, brake hose and ABS vehicle speed sensor
harness clip from the shock damper bracket (of vehicle with ABS) according to Fig. 2-19.
3) Dismantle the front shock damper with coil spring.
① Remove the nuts connecting the connecting rod of front stabilizer bar and the front shock
damper. Then dismantle the shock damper from the steering knuckle after removing the 2 nuts
and bolts connecting the front shock damper assembly and the steering knuckle, as shown in Fig.
2-20.
Dismantle the front shock damper with coil sprint, and then the 3 nuts on the suspension
②
bracket according to Fig. 2-21.

(2) Installation of front shock damper assembly.

To install, reverse the removal procedure
www.CarGeek.ir
Fig. 2-19
Fig. 2-20
Fig. 2-21
114
www.cargeek.ir