Installation Of Front Brake Wheel Hub Assembly; Replacement Of Front Stabilizer Bar; Replacement Of Steering Knuckle - Lifan 620 Maintenance Manual

(2) Installation of front brake wheel hub assembly

To install, reverse the removal procedure. When installing front wheel speed sensor, please
ensure that the connector clip is well matched.

2. Replacement of front stabilizer bar

(1) Disassembly of front stabilizer bar. Disconnect the related connections. Lower the whole front
sub-frame according to Fig. 2-12.
Remove the front stabilizer bar as shown in Fig. 2-13.
(2) Installation: Install the front stabilizer, reverse the removal procedure.

3. Replacement of steering knuckle.

www.CarGeek.ir
Fig. 2-12
Fig. 2-13
111
www.cargeek.ir