Steering System - Lifan 620 Maintenance Manual

The steering system is a special mechanism to change or maintain the driving direction of a
vehicle. It is used to change the direction at a proper time according to the requirement of the
driver during driving, and cooperate with the driving system to keep the vehicle moving stably in
case that the vehicle moves off the driving direction due to the accidental impact from the road
surface. It is one of the important systems to keep safe driving. Therefore, check and maintenance
of the steering system in time is an effective measure to ensure safe driving and fewer accidents.
The steering wheel of LF620 sedan is composed of steering wheel 1, steering column 2, power
steering pump 5, oil tank 4, steering gear 3, etc. Follow Fig. 2-23.
1. Return line bracket
3. Return line clamp
5. Steering oil pump intake pipe
7. A-type worm-driven tube hoop
9. Hex bolt with flat washer (75N·m)
11. Power steering oil can bracket
13. Steering return line assembly
15. Hexagon flange bolt (75N·m)
17. Cotter pin
19. Steering gear and tie-rod assembly
21. Acoustic hood on the steering gear
23. Steering column dustproof cap components
25. Steering wheel assembly
www.CarGeek.ir
Section II Steering System
Fig. 2-23
2. Hex bolt with flat washer
4. Return line bracket B
6. A-type worm-driven tube hoop
8. Power steering oil can assembly
10. Power steering oil can clip
12. Power steering oil pump assembly
14. Steering gear intake pipe assembly
16. Oil pipeline bracket A component
18. Hex slotted thin nut (75N·m)
20. Hexagon flange bolt (75N·m)
22. Collar of acoustic hood on the steering gear
24. Steering column and adjustment mechanism assembly
116
www.cargeek.ir