Presenting Content From Your Computer - Avaya Scopia XT7100 User Manual

2. Drag the Volume slider to set the value.
3. From the web interface only, select Save.
Related Links
Participating in Meetings

Presenting Content from Your Computer

You can display content from your computer on an Avaya Scopia
share this content with participants in a local conference room, and with remote participants during a
videoconference. Depending on your organization's setup, you can share content in the following
ways:
• Quickly present content without connecting your computer to the XT Codec Unit, as described
in Displaying a Presentation with an XT Series EP
®
Avaya Scopia
computer and endpoint are in different networks, make sure there is no NAT or firewall
between them.
• Present content by first connecting your computer to the DVI port on the XT Codec Unit. Use
this method when:
- Your computer does not have Scopia
- There is a firewall or NAT device between your computer and the XT Series.
- There is no network connection in the meeting room, and you are using the XT Series
monitor to present the content to participants in the local meeting room only.
Connect your computer as described in
page 57, and then share content as described in
April 2015
Figure 49: Call-Answer settings
on page 49
Desktop Client installed and be in the same network as the endpoint. If the
Comments? infodev@avaya.com
Presenting Content from Your Computer
®
XT Series monitor. You can
on page 54. Your computer must have
®
Desktop Client installed.
Connecting a Computer to the XT Series
Sharing Computer Content
Avaya Scopia
on
on page 59.
®
XT Series User Guide
53