Avaya Scopia XT7100 User Manual page 46

Starting a New Call
Table 7: Entering advanced information for a contact
Field Name
Name
Number
Type
Call Type
Rate
Trusted
You can also manually define the Type, Call Type, and Rate each time you place a call (see
Starting a Meeting
4. To edit an existing contact, select the contact. From the XT Series web interface, select Edit
for that contact's entry. From the endpoint, press the right-arrow for that contact's entry.
You can add several dial strings to the same contact. From the XT Series web interface,
select Insert Number. From the endpoint, select New Number.
®
Avaya Scopia XT Series User Guide
46
Description
Enter the contact's name.
Enter the dial string to contact this endpoint. It can be a
number, an H.323 alias like john_smith, or a URI address like
john@company.com.
After saving the contact, you can edit the contact's information
to add several numbers for the same contact, for example:
home, office or virtual room (see
page 47).
If necessary, select the protocol to use when calling this
personal endpoint or meeting room:
• Select H.323 for H.323 endpoints, such as other XT Series
endpoints, or when joining a meeting hosted by a Scopia
Elite MCU.
• Select SIP for SIP endpoints, such as Microsoft Lync clients .
• Select ISDN to call ISDN endpoints. This requires an ISDN
gateway such as Scopia
Deployment Guide for Avaya Scopia
Select whether the call is Audio-Video or Audio-Only.
Select the default bandwidth or call bitrate to be used when
calling this contact. Otherwise, the system uses the maximum
available bandwidth.
To indicate that this contact is trusted, select Yes. You can
then customize your XT Series to automatically answer calls
from trusted contacts only (see
Preferences
on page 39.
Figure 38: Contact list
Comments? infodev@avaya.com
Editing an existing contact
®
Gatewayfor ISDN (see
Setting Call Answering
on page 77).
on
®
®
XT Series).
April 2015