Avaya Scopia XT7100 User Manual page 63

Recorded videoconferences use one monitor only. During recording, the auxiliary monitor displays
the same video layout as the primary monitor.
Before a call, your monitor(s) display your own video, except on the Scopia
shows the computer content by default.
Meeting moderators can also change the video layout for all participants in a meeting (see
the Video Layout for all Participants
Procedure
1. To cycle through the most commonly used video layouts, press the Layouts
XT Remote Control Unit repeatedly.
2. To view all available layouts, press and hold the Layouts
Unit, or press ok/menu and then select Layouts.
The choices of layouts depend on the number of streams to display and the number of
connected monitors. The group icon
represents local video. The graph icon
When a participant shares content in a meeting hosted by a Scopia
you can choose from an additional set of layouts designed to optimize screen space (known
as gallery layouts). This requires Avaya Scopia
®
3. (Scopia XT Executive only) If you are using Scopia
images to change the arrangement of the layout, or you can right-click an empty area of the
video layout and choose a different layout from the context menu.
April 2015
on page 73).
represents remote video, while the single icon
Figure 61: Changing video layout during a call (example)
Comments? infodev@avaya.com
Changing Your Own Video Layout
key on the XT Remote Control
represents the presentation.
®
Solution version 8.3.2 or later.
®
XT Control, you can drag and drop the
Avaya Scopia
®
XT Executive which
Changing
key on the
®
Elite 6000 Series MCU,
®
XT Series User Guide
63