Avaya Scopia XT7100 User Manual page 41

Select the entry to dial, and then select Call or press ok/menu on the XT Remote Control
Unit.
4. To join a meeting hosted elsewhere, call the endpoint or MCU which hosts the meeting,
using any of the above dial methods.
5. To host a meeting on your built-in MCU by dialing out to other participants:
a. Call the first participant (see
b. Call others to join. From the XT Series web interface, select Make your Call > Basic
Options > Direct Call / Contacts. From the endpoint, within the meeting with the first
participant, press ok/menu and select Participants > Invite a new participant > By
Address / From Contacts.
c. Select a contact or enter a dial string to call the next participant.
d. Repeat to add more participants.
6. To host a meeting on your built-in MCU by giving your endpoint's contact details, be sure to
give the correct information.
To accept an incoming call, select Accept.
April 2015
Figure 29: Contact list
Starting a Meeting
Figure 30: Inviting a new participant from the endpoint interface
Comments? infodev@avaya.com
on page 39).
®
Avaya Scopia XT Series User Guide
Starting a Meeting
41