Resolving Monitor Display Problems - Avaya Scopia XT7100 User Manual

Solution
Adjust the way the image appears on the monitor. To see your adjustments in real-time, we
recommend performing this procedure from the endpoint itself.
If configuring from the endpoint, you must first enable advanced configuration, as described in
Deployment Guide for Avaya Scopia
1. Access the monitor settings. From the XT Series web interface, select Administrator
settings > I/O connections > Monitor > Graphic Adjustments. From the endpoint's main
menu, select Configure > Advanced > I/O connections > Monitor > Graphic
Adjustments.
2. Navigate to the monitor requiring adjustment (Monitor HD1 or Monitor HD2).
3. Select your preferred image view mode. On the Scopia
HD2 area.
Table 11: Adjustment options for the monitor
Option
Adjustment Mode
Top, Left, Bottom,
Right
April 2015
®
XT Series.
Figure 87: Adjusting the monitor
Description
Select Menu, presentation (default) to adjust both the system menu
and presentation, local or received.
Select Menu to adjust the system menus only.
Drag the sliders to the required sizes until the menu or presentation
borders are visible on the monitor.
You can also adjust the image for the monitor displaying the system
menu, in the quick setup wizard as described in
Position on page 30.
Comments? infodev@avaya.com

Resolving Monitor Display Problems

®
XT Executive, use the Monitor
Adjusting the Image
®
Avaya Scopia XT Series User Guide
89