Avaya Scopia XT7100 User Manual page 21

Controlling the XT Series
Figure 10: The XT Remote Control Unit
Scroll through menus and options using the arrow keys and pressing the ok/menu key to select an
item.
Enter letters and digits into a field using the remote's keypad on the XT Remote Control Unit. The
system displays the current entry method to the right of the field (Figure 11: Entry method displayed
to the right of an input field on page 21). You can switch entry methods by pressing the 1/a/A
button repeatedly while the cursor is in the input field, to switch between abc1 (default) for lower
case alphanumeric characters, ABC for upper case characters only (no digits), abc for just lower
case characters only (no digits), and 123 for digits only. To enter a letter or number, press a key
repeatedly to cycle through its characters.
Figure 11: Entry method displayed to the right of an input field
During a videoconference, you can send DTMF tones via the keypad. DTMF is often used to
communicate with an MCU or other device which accepts DTMF commands. For example, to
®
display the MCU menu in a call hosted on a Scopia Elite MCU, press * at any time. For more
®
information, see User Guide for Scopia Elite MCU.
Some additional shortcuts from the XT Remote Control Unit include:
• Press and hold a number key to recall a camera preset (0-9).
®
April 2015 Avaya Scopia XT Series User Guide
21
Comments? infodev@avaya.com