Moving The Ptz Camera's Position - Avaya Scopia XT7100 User Manual

Moving the PTZ Camera's Position

About this task
This section details how to set the angle and zoom of a PTZ camera connected to your Avaya
®
Scopia XT Series.
A PTZ camera can pan to swivel horizontally, tilt to move vertically, and optically zoom to devote all
the camera's pixels to one area of the image. For example, the XT Standard Camera is a PTZ
camera with its own power supply and remote control, and uses powerful lenses to achieve superb
visual quality. In contrast, fixed cameras like webcams only offer digital PTZ, where the zoom crops
the camera image, displaying only a portion of the original, resulting in fewer pixels of the zoomed
image, which effectively lowers the resolution. Fixed cameras also offer digital pan and tilt only after
zooming, where you can pan up to the width or length of the original camera image.
Once you have set the camera's angle and zoom, the system restores the last camera position the
next time you use the camera. You can store multiple preset camera positions if needed (see
Deployment Guide for Avaya Scopia
Procedure
1. Access the camera control settings. From the XT Series web interface, select More
Actions > Cameras Control. From the endpoint's main menu, select Control Camera.
During a meeting, press ok/menu to access the videoconference menu
Controlling your camera
2. If you have more than one camera, first select the one you want to move. From the XT
Series web interface, select the Cameras field. From the endpoint's main menu, select
Control Camera > ok/menu > Video Source. Press ok/menu repeatedly to switch between
cameras.
April 2015
®
XT Series).
on page 51), and then select Control Camera.
Figure 46: Controlling your camera
Comments? infodev@avaya.com
Moving the PTZ Camera's Position
(Figure 46:
®
Avaya Scopia XT Series User Guide
51