Avaya Scopia XT7100 User Manual page 22

Getting Started
• Press and hold the Dial
• Press and hold the near/far key to switch between local and remote shared content.
Related Links
Controlling the XT Series
Pairing an XT Remote Control Unit
Pairing an XT Remote Control Unit
About this task
If you have multiple XT Series units in the same room, you can pair a XT Remote Control Unit with
its XT Codec Unit so that every unit has its dedicated remote, so when you press a key on a remote,
it triggers an action on the correct XT Series unit. Enter the same numeric code in both the XT
Series and its XT Remote Control Unit to pair them. By default all remotes and endpoints use the
same code 01.
Procedure
1. Access the general settings. From the XT Series web interface, select Basic Settings >
General. From the endpoint's main menu, select Configure > General.
You can use the XT Remote Control Unit's initial default pairing to perform this task.
2. Enter a two-digit numeric code between 01 and 99 in the Remote Control Code field.
3. From the web interface only, select Save.
4. On the XT Remote Control Unit, press the * and # keys simultaneously until its red light
blinks twice.
®
Avaya Scopia XT Series User Guide
22
key to toggle Do Not Disturb (DND).
on page 18
on page 22
Figure 12: Setting the XT Remote Control Unit Code
Comments? infodev@avaya.com
April 2015