Accessing The Xt Series Local Menu - Avaya Scopia XT7100 User Manual

Accessing the XT Series Local Menu

About this task
After switching on the XT Series, the main menu appears on the connected monitor.
To navigate the local menus, use the XT Remote Control Unit or for Scopia
can use a keyboard and mouse. You can also access the system via the web, where the main
screen is laid out differently (see
The main menu offers the following features:
• Call starts audio and video calls.
• Contacts allows you to view, edit, and call a contact.
• Calendar allows you to view and join meetings scheduled for this endpoint.
• Present starts sharing content from your computer, or displays the connected computer's
content.
• Control Camera adjusts camera position.
• Recording allows you to record and playback a videoconference (may require a license).
• Configure adjusts settings and checks the system status.
Before you begin
®
(Scopia XT Executive only) To navigate menus with a keyboard and mouse, you must first connect
your computer and then complete the Quick Setup Wizard which ends with installing the Scopia
Control utility to use the keyboard and mouse for menu navigation (see
Control to Use Keyboard and Mouse (Scopia
Procedure
1. Check the light on the front of the XT Codec Unit. When it is connected to power but
switched off, the LED blinks.
April 2015
Accessing XT Series Web Interface
Figure 9: XT Series main menu
®
XT Executive)
Comments? infodev@avaya.com
Controlling the XT Series
®
XT Executive only, you
on page 23).
Installing Scopia
on page 35).
®
Avaya Scopia XT Series User Guide
®
XT
®
XT
19