Configuring The Default Acs Attributes From The Cli; Configuring Cpe Attributes - HP 5920 Configuration Manual

Attribute
ACS connect
password
For more information about DHCP and DHCP Option 43, see layer 3—IP Services Configuration Guide.
Configuring the preferred ACS attributes from the CLI
Step
1. Enter system view.
2. Enter CWMP view.
3. Configure the preferred ACS
URL.
4. Configure the username for
authentication to the preferred
ACS URL.
5. (Optional.) Configure the
password for authentication to
the preferred ACS URL.

Configuring the default ACS attributes from the CLI

Step
1. Enter system view.
2. Enter CWMP view.
3. Configure the default ACS
URL.
4. Configure the username for
authentication to the default
ACS URL.
5. (Optional.) Configure the
password for authentication
to the default ACS URL.

Configuring CPE attributes

You can assign CPE attribute values to the CPE from the CPE's CLI or the ACS. The CLI- and
ACS-assigned values overwrite each other, whichever is assigned later.
For more information about the configuration methods supported for each CPE attribute, see
"Configuration task
Attribute value
5678
Command
system-view
cwmp
cwmp acs url url
cwmp acs username username
cwmp acs password { cipher |
simple } password
Command
system-view
cwmp
cwmp acs default url url
cwmp acs default username
username
cwmp acs default password
{ cipher | simple } password
list."
Hexadecimal form
35363738
225
Remarks
N/A
N/A
By default, no preferred ACS URL
has been configured.
By default, no username has been
configured for authentication to the
preferred ACS URL.
By default, no password has been
configured for authentication to the
preferred ACS URL.
Remarks
N/A
N/A
By default, no default ACS URL has
been configured.
By default, no username has been
configured for authentication to the
default ACS URL.
By default, no password has been
configured for authentication to the
default ACS URL.