Terminating Another Netconf Session - HP 5920 Configuration Manual

<?xml version="1.0" encoding="UTF-8"?>
<rpc message-id="101" xmlns="urn:ietf:params:xml:ns:netconf:base:1.0">
<get-sessions/>
</rpc>
If the client receives a message as follows, the operation is successful:
<?xml version="1.0" encoding="UTF-8"?>
<rpc-reply xmlns="urn:ietf:params:xml:ns:netconf:base:1.0" message-id="101">
<get-sessions>
<Session>
</Session>
</get-sessions>
</rpc-reply>
The output shows the following information:
• The session ID of an existing NETCONF session is 1.
The login user type is vty0.
•
• The login time is 201 1-01-05T00:24:57.
The user does not hold the lock of the configuration.
•

Terminating another NETCONF session

NETCONF allows one client to terminate the NETCONF session of another client. The client whose
session is terminated returns to user view.
# Copy the following message to the client to terminate the specified NETCONF session:
<rpc message-id="101"
<kill-session>
<session-id>
Specified session-ID
</session-id>
</kill-session>
</rpc>
After receiving the kill-session request, the device returns a response in the following format if the
kill-session operation is successful:
<?xml version="1.0" encoding="UTF-8"?>
<rpc-reply message-id="101"
xmlns="urn:ietf:params:xml:ns:netconf:base:1.0">
<ok/>
</rpc-reply>
<SessionID>1</SessionID>
<Line>vty0</Line>
<UserName></UserName>
<Since>2011-01-05T00:24:57</Since>
<LockHeld>false</LockHeld>
xmlns="urn:ietf:params:xml:ns:netconf:base:1.0">
267