HP 5920 Configuration Manual page 113

Step
2. Configure a target host.
3. (Optional.) Configure a
source address for
notifications.
4. (Optional.) Enable
extended
linkUp/linkDown
notifications.
5. (Optional.) Configure
the notification queue
size.
6. (Optional.) Configure
the notification lifetime.
Command
•
(Method 1) Send traps to the target
host:
In non-FIPS mode:
snmp-agent target-host trap address
udp-domain { ip-address | ipv6
ipv6-address } [ udp-port
port-number ] [ vpn-instance
vpn-instance-name ] params
securityname security-string [ v1 | v2c
| v3 [ authentication | privacy ] ]
In FIPS mode:
snmp-agent target-host trap address
udp-domain { ip-address | ipv6
ipv6-address } [ udp-port
port-number ] [ vpn-instance
vpn-instance-name ] params
securityname security-string v3
{ authentication | privacy }
•
(Method 2) Send informs to the target
host:
In non-FIPS mode:
snmp-agent target-host inform
address udp-domain { ip-address |
ipv6 ipv6-address } [ udp-port
port-number ] [ vpn-instance
vpn-instance-name ] params
securityname security-string { v2c | v3
[ authentication | privacy ] }
In FIPS mode:
snmp-agent target-host inform
address udp-domain { ip-address |
ipv6 ipv6-address } [ udp-port
port-number ] [ vpn-instance
vpn-instance-name ] params
securityname security-string v3
{ authentication | privacy }
snmp-agent { inform | trap } source
interface-type { interface-number |
interface-number.subnumber }
snmp-agent trap if-mib link extended
snmp-agent trap queue-size size
snmp-agent trap life seconds
103
Remarks
Use either method.
By default, no target host is
configured.
By default, SNMP uses the IP
address of the outgoing routed
interface as the source IP address.
By default, the SNMP agent sends
standard linkup/linkDown
notifications.
By default, the notification queue
can hold 100 notification
messages.
The default notification lifetime is
120 seconds.