Dns Template Configuration Example - HP 5920 Configuration Manual

# Configure static routes or a routing protocol to make sure the devices can reach each other. (Details not
shown.)
# Create ICMP template icmp and specify 10.2.2.2 as the destination IP address.
<DeviceA> system-view
[DeviceA] nqa template icmp icmp
[DeviceA-nqatplt-icmp-icmp] destination ip 10.2.2.2
# Set the probe timeout time for the ICMP operation to 500 milliseconds, and configure the operation to
repeat at an interval of 3000 milliseconds.
[DeviceA-nqatplt-icmp-icmp] probe timeout 500
[DeviceA-nqatplt-icmp-icmp] frequency 3000
# If the number of consecutive successful probes reaches 2, the operation succeeds. The NQA client
notifies the feature of the successful operation event.
[DeviceA-nqatplt-icmp-icmp] reaction trigger probe-pass 2
# If the number of consecutive probe failures reaches 2, the operation fails. The NQA client notifies the
feature of the operation failure.
[DeviceA-nqatplt-icmp-icmp] reaction trigger probe-fail 2

DNS template configuration example

Network requirements
As shown in
whether Device A can translate the domain name host.com into an IP address through the DNS server.
Figure 55 Network diagram
Configuration procedure
# Assign each interface an IP address. (Details not shown.)
# Configure static routes or a routing protocol to make sure the devices can reach each other. (Details not
shown.)
# Create DNS template dns.
<DeviceA> system-view
[DeviceA] nqa template dns dns
# Specify the IP address of the DNS server 10.2.2.2 as the destination address, the domain name to be
translated as host.com, the domain name resolution type as type A, and the expected IP address as
3.3.3.3.
[DeviceA-nqatplt-dns-dns] destination ip 10.2.2.2
[DeviceA-nqatplt-dns-dns] resolve-target host.com
[DeviceA-nqatplt-dns-dns] resolve-type A
[DeviceA-nqatplt-dns-dns] expect ip 3.3.3.3
# If the number of consecutive successful probes reaches 2, the operation succeeds. The NQA client
notifies the feature of the successful operation event.
Figure 55, configure a DNS template for a feature to perform the DNS operation to test
168