HP 5920 Configuration Manual page 281

Operation Description
Retrieves a number of
non-default configuration data
get-bulk-config entries starting from the data
entry next to the one with the
specified index.
Changes the running
configuration.
To use the merge attribute in the
edit-config operation, you must
specify the operation target (on
a specified level):
•
edit-config: merge
•
•
If the specified target exists,
the operation directly
changes the configuration
for the target.
If the specified target does
not exist, the operation
creates and configures the
target.
If the specified target does
not exist and it cannot be
created, an error message is
returned.
271
XML example
To retrieve non-default configuration for all interfaces:
<rpc message-id ="100"
xmlns="urn:ietf:params:xml:ns:netconf:ba
se:1.0">
<get-bulk-config>
<source>
<running/>
</source>
<filter type="subtree">
<top
xmlns="http://www.hp.com/netconf/config:
1.0">
<Ifmgr>
</Ifmgr>
</top>
</filter>
</get-bulk-config>
</rpc>
To change the buffer size to 120:
<rpc message-id ="101"
xmlns="urn:ietf:params:xml:ns:netconf:ba
se:1.0"
xmlns:xc="urn:ietf:params:xml:ns:netconf
:base:1.0">
<edit-config>
<target>
<running/>
</target>
<config>
<top
xmlns="http://www.hp.com/netconf/config:
1.0"><Syslog
xmlns="http://www.hp.com/netconf/config:
1.0" xc:operation="merge">
<LogBuffer>
<BufferSize>120</BufferSize>
</LogBuffer>
</Syslog>
</top>
</config>
</edit-config>
</rpc>