HP 5920 Configuration Manual page 91

Field
Serial number
Sysname (host name or
host IP address)
%% (vendor ID)
vv (version information)
Module
Level
Mnemonic
Source
Content
Table 14 Timestamp precisions and configuration commands
Item Destined to the log host
Precision Seconds
Command
used to set the
info-center timestamp loghost
timestamp
format
Table 15 Description of the timestamp parameters
Timestamp
Description
parameters
Time that has elapsed since system startup, in
the format of xxx.yyy. xxx represents the
higher 32 bits, and yyy represents the lower
boot
32 bits, of milliseconds elapsed.
Logs that are sent to all destinations other than
a log host support this parameter.
Current date and time, in the format of mmm
dd hh:mm:ss yyy for logs that are output to a
log host, or MMM DD hh:mm:ss:xxx YYYY for
date
logs that are output to other destinations.
All logs support this parameter.
Description
Serial number of the device that generated the log.
This field exists only in logs in unicom format that are sent to the log host.
The sysname is the host name or IP address of the device that generated the log.
You can use the sysname command to modify the name of the device.
Indicates that the information was generated by an HP device.
This field exists only in logs sent to the log host.
Identifies the version of the log, and has a value of 10.
This field exists only in logs that are sent to the log host.
Specifies the name of the module that generated the log. You can enter the
info-center source ? command in system view to view the module list.
Identifies the level of the log. See
levels.
Describes the content of the log. It contains a string of up to 32 characters.
Identifies the source of the log. It can take one of the following values:
•
IRF member ID.
•
IP address of the log sender.
Provides the content of the log.
81
Table 6 for more information about severity
Destined to the console, monitor
terminal, log buffer, and log file
Milliseconds
info-center timestamp
Example
%0.109391473 Sysname
FTPD/5/FTPD_LOGIN: User ftp
(192.168.1.23) has logged in
successfully.
0.109391473 is a timestamp in the boot
format.
%May 30 05:36:29:579 2003 Sysname
FTPD/5/FTPD_LOGIN: User ftp
(192.168.1.23) has logged in
successfully.
May 30 05:36:29:579 2003 is a
timestamp in the date format.