Example For Retrieving A Data Entry For The Interface Table - HP 5920 Configuration Manual

<running/>
</source>
<filter type="subtree">
<top xmlns="http://www.hp.com/netconf/config:1.0">
<Syslog/>
</top>
</filter>
</get-config>
</rpc>
Verifying the configuration
If the client receives the following text, the get-config operation is successful:
<?xml version="1.0" encoding="UTF-8"?>
<rpc-reply xmlns="urn:ietf:params:xml:ns:netconf:base:1.0" message-id="101">
<data>
<top xmlns="http://www.hp.com/netconf/config:1.0">
</top>
</data>
</rpc-reply>

Example for retrieving a data entry for the interface table

Network requirements
Retrieve a data entry for the interface table.
Configuration procedure
# Enter XML view.
<Sysname> xml
# Exchange capabilities.
<hello xmlns="urn:ietf:params:xml:ns:netconf:base:1.0">
<capabilities>
<capability>urn:ietf:params:netconf:base:1.0</capability>
</capabilities>
</hello>
# Retrieve a data entry for the interface table.
<rpc message-id="101" xmlns="urn:ietf:params:xml:ns:netconf:base:1.0"
xmlns:web="urn:ietf:params:xml:ns:netconf:base:1.0">
<get-bulk>
<filter type="subtree">
xmlns:web="http://www.hp.com/netconf/base:1.0">
<Syslog>
<LogBuffer>
<BufferSize>120</BufferSize>
</LogBuffer>
</Syslog>
<top xmlns="http://www.hp.com/netconf/data:1.0"
<Ifmgr>
<Interfaces web:count="1">
255