Icmp Template Configuration Example - HP 5920 Configuration Manual

Destinations : 12
Destination/Mask
0.0.0.0/32
10.2.1.0/24
10.2.1.0/32
10.2.1.2/32
10.2.1.255/32
127.0.0.0/8
127.0.0.0/32
127.0.0.1/32
127.255.255.255/32
224.0.0.0/4
224.0.0.0/24
255.255.255.255/32
The output shows that the static route does not exist, and the status of the track entry is negative.

ICMP template configuration example

Network requirements
As shown in
NQA client Device A to Device B.
Figure 54 Network diagram
Configuration procedure
# Assign each interface an IP address. (Details not shown.)
Routes : 12
Proto Pre
Direct 0
Direct 0
Direct 0
Direct 0
Direct 0
Direct 0
Direct 0
Direct 0
Direct 0
Direct 0
Direct 0
Direct 0
Figure 54, configure an ICMP template for a feature to perform the ICMP operation from the
Cost NextHop
0 127.0.0.1
0 10.2.1.2
0 10.2.1.2
0 127.0.0.1
0 10.2.1.2
0 127.0.0.1
0 127.0.0.1
0 127.0.0.1
0 127.0.0.1
0 0.0.0.0
0 0.0.0.0
0 127.0.0.1
167
Interface
InLoop0
Vlan3
Vlan3
InLoop0
Vlan3
InLoop0
InLoop0
InLoop0
InLoop0
NULL0
NULL0
InLoop0