Displaying And Maintaining Cwmp; Cwmp Configuration Example; Network Requirements - HP 5920 Configuration Manual

HTTPS connection establishment. For more information about configuring SSL client policies, see
Security Configuration Guide.
To specify an SSL client policy for the CPE to establish an HTTPS connection to the ACS:
Step
1. Enter system view.
2. Enter CWMP view.
3. Specify an SSL client policy.

Displaying and maintaining CWMP

Execute display commands in any view.
Task
Display CWMP configuration.
Display the current status of CWMP.

CWMP configuration example

Network requirements

As shown in
attributes to the CPEs from the DHCP server.
The configuration files for the devices in equipment rooms A and B are configure1.cfg and configure2.cfg,
respectively.
Figure 3, use HP IMC BIMS as the ACS to bulk-configure the devices (CPEs), and assign ACS
Command
system-view
cwmp
ssl client-policy policy-name
Command
display cwmp configuration
display cwmp status
229
Remarks
N/A
N/A
By default, no SSL client policy is
specified.