Remove the hard drive backplane.
6.
To replace the component, reverse the removal procedure.
SFF hard drive cage
To remove the component:
Power down the server (on page 26).
1.
Extend or remove the server from the rack
2.
server from the
Remove the access panel
3.
Remove all hot-plug hard drives
4.
Disconnect all cables from the hard drive backplane.
5.
Remove the hard drive backplane
6.
rack" on page 27).
("Access
panel" on page 33).
("Hot-plug SAS hard
("SFF hard drive
("Remove the server from the
drive" on page 30).
backplane" on page 38).
Removal and replacement procedures 39
rack" on page 27,
"Extend the