Fax Mode (Condition Settings Screen) - Xerox WorkCentre C226 System Administration Manual

Fax Mode (Condition Settings Screen)

NOTE:
Xerox WorkCentre C226 System Administration Guide
The condition settings screen of fax mode is displayed by pressing the [IMAGE SEND]
key while the print mode, copy mode, or job status screen appears in the touch panel.
In the explanations that follow, it is assumed that the initial screen that appears after
pressing the [IMAGE SEND] key is the condition settings screen (page 6-4). If you
have set the display to show the address directory screen (page 6-6) when the
[IMAGE SEND] key is pressed, touch the [CONDITION SETTINGS] key in the
address directory screen to display the condition settings screen.
"Default display settings" on page 6-50 in the key operator programs can be used to
select whether the condition settings screen appears or the address directory screen
appears as the initial screen when the [IMAGE SEND] key is pressed.
When the network scanner option is installed, you will return to the initial screen of fax
mode or scanner mode, whichever mode was selected last. (Pressing the [IMAGE
SEND] key in a copy screen or printer screen returns you to the initial screen of fax
mode.)
Fax Mode (Condition Settings Screen)
6-3