12
SERVICE WORK ON THE CHASSIS
12.17
Installing the front fender
12.18
Folding the seat up
12.19
Locking the seat
12.20
Taking off the spoiler
–
Ensure that the spacers are mounted in the fender.
–
Position the front fender. Mount and tighten screws
Guideline
Remaining screws, chassis
Info
Make sure the holding lugs engage in the headlight mask.
B01030-10
–
Press release lever
–
Lift the seat and fold it up.
B01021-10
–
Fold down the seat and push it down.
The seat engages with an audible click.
–
Finally, check that the seat is correctly locked.
B01022-10
Preparatory work
–
Fold the seat up. (
Main work
–
Remove screws
305979-10
.
1
p. 45)
.
1
.
1
M6
10 Nm (7.4 lbf ft)
45